Micro Switches
Microswitches (also known as snap-acting switches) are very widely used in many industrial and automotive applications. They are designed to be switched by a mechanical actuator (E.g. a cam) rather than by direct manual operation, and as such are unusual in the world of switches. Their operate force is generally much lower than in other types of switch, and their no-stall snap-acting mechanism is designed to deliver a uniquely precise and repeatable switching action. Available in a range of industry-standard sizes, they can be supplied with a choice of button, lever or roller-lever actuators. Fully-sealed, pre-wired versions (such as ZF’s DC-series) provide a highly reliable switching solution for the most demanding of applications.
NM02 Series – Center-Off Microswitches
The NM02 series of centre-off microswitches from ZF are single pole, double throw switches with a 40° sideways actuation deflection. The NM02 series allows the actuator to travel to a max of 40° to either side with actuation possible at 10° deflection from the centre point....
View Product
SJ/SK Series – Sealed Sub-Subminiature Microswitches
The SJ and SK series of sealed sub-subminiature microswitches from ZF are single pole, single throw switches with a choice of solder or quick-connect terminals and sub-subminiature sizes of: SJ series 15.2mm (w) by 8.1mm (h) and 6.4mm (d), SK series 14.7mm (w) by 6.8mm (h) and 5.4mm (d)....
View Product
W4 Series – Miniature Microswitches
The W4 series of miniature microswitches from ZF are single pole, single or double throw switches with a wiping contact system suitable for special requirements such as capacitor loads. The W4 series has a miniature size of 27.8mm (w) by 15.9mm (h) and 10.3mm (d) and a variety of terminal configurations....
View Product
DG Series – Sub-Subminiature Microswitches
The DG series of sub-subminiature microswitches from ZF are single pole, double throw switches with a sub-subminiature size of 12.8mm (w) by 6.5mm (h) and 5.8mm (d) and comes with a choice of PC pins or solder terminations....
View Product
DH Series – Ultraminiature Microswitches
The DH series of ultraminiature microswitches from ZF are single pole, double throw switches with an ultraminiature size of 8.2mm (w) by 6.2mm (h) and 2.7mm (d) and come with a choice of PC pins or solder terminations....
View Product
DJ Series – Sealed Sub-Subminiature Microswitches
The DJ series of sealed sub-subminiature microswitches from ZF are single pole, double throw switches with a sub-subminiature size of 15.2mm (w) by 9.7mm (h) and 6.4mm (d) and come with a choice of PC pins or solder terminals....
View Product
DK Series – Sealed Sub-Subminiature Microswitches
The DK series of sealed sub-subminiature microswitches from ZF are single pole, single or double-throw switches. With a sub-subminiature size of 14.7mm (w) by 7.4mm (h) and 5.4mm (d) and come with a wide variety of solder, PC pins or pre-wired terminations....
View Product
DR Series – Sub-Subminiature Microswitches
The DR series of sub-subminiature microswitches from ZF are single pole, double throw switches with a sub-subminiature size of 13.65mm (w) by 6.8mm (h) and 5.4mm (d) and come with a choice of PC pins or solder terminals....
View Product
DZ Series – Subminiature Microswitches
The DZ series of subminiature microswitches from ZF are single pole, single or double throw switches with positive break action on single throw normally closed contacts. The DZ series have a subminiature size of 20mm (w) by 12mm (h) and 6.45mm (d) and come with a choice of solder or quick-connect terminations....
View Product
E Series – General Purpose Microswitches
The E series of general-purpose microswitches from ZF are single or double pole, single or double throw switches with a size of 46.3mm (w) by 16.3mm (h) and 16.3mm (d) for single pole. Alternatively, 46.1mm (w) by 28.6mm (h) and 16.4mm (d) for double pole both with a choice of screw, solder or quick-connect terminations....
View Product